Week 115-117 - Making and Fitting the Kitchen

Right, this is it: the last major job to do before we can move in to the flat.

I’ve actually had the kitchen designed since very early on in the build (over 3 years!), problem is, being the last thing to be done in this phase of the build, we don’t actually have the budget or (more importantly) the time left for me to make it. Dammit.

Being a stubborn git though, I am in no way willing to give up on my design, so ive decided we are going to go ahead with the final carcasses work and all the appliances etc, so the kitchen will ‘work’ in the same way as originally designed, but for now we will have some temporary doors, worktops and some other details to be upgraded later

So all in all this basically leaves me with design brief of: Design a kitchen that still looks cool and works well, but spend as little money as possible on the parts that will change in a couple of years. Plus it needs to be made, fitted and finished within two weeks.

(Obviously a terrible/unrealistic idea, but) Here we go!

I decided to make the carcasses out of a fairly new product to the market, it is called ‘High density coloured MDF’ and is exactly that to be honest. The wood fibres are dyed before being formed into the board, so the colour is all the way though the sheet, not just the surface.

As a side note I would like to mention that ‘MDF’ stands for ‘Medium Density Fibreboard’ so they have essentially called it ‘High Density - Medium Density Fibreboard’ Good work guys!

As you can see above it comes in huge great sheets. I decided to use the black for carcass work with oak detailing. Picture above shows the base cabinets machined and sprayed in the drying rack, ready for assemble. 

I won’t bore you with endless pictures of making cupboards in the workshop, so we’ll get on with the fitting. Above shows all the base cabinets fitted.

Before doing this I have also made an enclosure for a nice powerful extractor above where the hob will go (between windows) and had it plastered in to the walls and ceiling. It’s important this thing has a lot of suck (!) as it is an open plan flat that we don’t want it to smell the same as whatever is being cooked.

Full height cabinets fitted. These will house integrated fridge/freezer, ovens and have a pull out larder for food storage.

All carcasses and appliances now fitted. Everything you see in this picture is fully permanent. Everything you see added to the kitchen from now on is semi temporary (about 2 years) until I get a chance to do the much cooler design work I want to.

Gluing up the curved end (oak) of the breakfast bar in the workshop

Making a light out of a colander for above the breakfast bar, I’ll be honest; I stole this idea from ‘That 70’s Show’ – although they used a cheese greater

Flocking the handles for the doors – those of you that know me or my work will know I’m a little obsessed with flock. I thought this would be a good opportunity to put some in a high wear environment and see how it coped.

Finished kitchen before doors

Finished kitchen  

I’ll admit that this did take close to three weeks to completely finish rather than two, but still pretty good going. It’s not as cool as it will one day be, but I think it looks great for now and if nothing else its infinitely better than any kitchen we’ve had in rental places before.

That’s it then…. It’s time for us to move in! who knew this day would actually ever come……